SKB iSeries 0705-3 Custom Waterproof Hard Utility Case for the ALS TRMR-LE Reloadable Diversionary Flash-Bang – Impact Grenade – Black

$54.99

SKB iSeries 0705-3 Custom Waterproof Hard Utility Case for the ALS TRMR-LE Reloadable Diversionary Flash-Bang – Black Case

ALS Less Lethal Systems

In stock

Product Info & Specs

SKB iSeries 0705-3 Custom Waterproof Hard Utility Case for the ALS TRMR-LE Reloadable Diversionary Flash-Bang – Black Case

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket sealed, water and dust tight, submersible design (MIL-C-4150J / IP67) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C). Our iSeries line is resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

This waterproof utility hard case is custom made with laser-cut foam to perfectly secure one ALS TRMR-LE Reloadable Diversionary Flash-Bang along with 12 12-gauge reloads for additional training purposes.

*Case only, Flash-Bang and 12-gauge blank rounds sold separately. Or check out the prepackaged ALS TRMR-LE Kit with everything!

Waterproof Test Data

Drop Test Data

Case Features:
  • Waterproof and dust tight design (MIL-C-4150J / IP67)
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve (MIL-STD-648C)
  • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
  • Resistant to impact damage (MIL-STD-810F)

Specifications:

  • Lid Depth: 0.50 in 1.27 cm
  • Base Depth: 2.75 in 6.99 cm
  • Interior Length: 7.50 in
  • Interior Width: 5.00 in
  • Interior Depth:  3.25 in
  • Interior Cu. Volume: 0.07 cu ft
  • Exterior Length: 8.36 in
  • Exterior Width: 6.70 in
  • Exterior Depth: 3.83 in
  • Exterior Cu. Volume: 0.12 cu ft
  • Max. Temperature: 180.00° F
  • Min. Temperature: -69.00° F
  • Max. Buoyancy: 5.00 lb
  • Carton Length: 9.00 in
  • Carton Width: 7.13 in
  • Carton Depth: 4.31 in
  • Carton Cu. Volume: 0.16 cu ft
  • Product Weight: 1.15 lb

See the Flash Bang

The TRMR-LE Training Device is a reloadable training diversionary device body that can be reloaded up to 250 times with the ALS1208 12ga Bore Thunder cartridge. The body incorporates a safety button that must be engaged to twist the top section to arm, which functions similar to a standard firearm safety. Upon deployment, the device’s kinetic energy causes the wobble top to move, forcing the firing pin into the primer to function the shell. The base is then removed to expel the spent shell, reloaded with a new shell and reassembled for next use. The ALS1208 produces approximately 172 dB and 1.2 PSI at 5 feet with a flash.

ATF Ruling on TRMR 5-26-15

Features:

  • Device does not require special ATF approval
  • Uses the ALS1208 cartridge which has no special storage requirements
  • System output of 172 dB with 1.2 PSI over-pressure measured at 5 feet
  • Utilizes a twist to arm mechanism – no levers to lose or snag
  • System can be made safe again by rotating the arming collar back to the safe position
  • No-Roll Impact Initiation System, means no waiting for a delay or “cooking off” a fuze
  • Engineered to withstand 250 uses
  • Safety tested to withstand a 10 ft drop (in the safe position)
  • Can be configured as an irritant/marking powder dispersal system using a .68 ball

 

 

Additional information

Weight 4 lbs
Dimensions 8 × 4 × 2 in

You may also like…